01 – Setting number of cabs in use

This article provides the methods you need to set the correct number of cabs on your Prodigy Advanced² system. Setting the correct number of handsets allows for the correct operation of the horn.

Procedure

The following procedure must be performed on the MASTER cab on the system. From your hand-held perform the following procedure:

  • Turn the Cab Select switch (on the base unit) to the “All Cabs” position (The switch must be in this position to limit the number of Cabs)
  • Press SYS and 9
  • Using 0 – 9, enter the address of the last operational Cab (To enable only one cab press “0”, for two cabs press “1”, for three cabs… you get the idea), and finally
  • Press the “Enter” button to set the number of cabs

This limits the number of Cabs and speeds response times on the handheld for things like short horn blasts.